Visual Basic, Deplhi, C++, C# etc.) together with the free Virtual COM port driver from FTDI or use the free Direct driver DLL from FDTI (see Download page for drivers). It consumes max 100mA, but normally not more than 60mA (this depends on BUS load and eventual CAN cable errors etc.). The module plugs directly into a standard USB port and provides a standard DB9 male output to CAN systems according to CiA (CAN in Automation) DS102-1 recommendations. Free Windows USB driver available (32 & 64bit).Free Interface DLL (32 & 64bit) or low level Ascii Commands API.CAN connection according to CiA DS102-1 standard.Time Stamp (optional) in mS for incomming frames.32 CAN frames deep FIFO buffer for incomming frames.Compliant to CAN 2.0A (11bit ID) & CAN 2.0B (29bit ID).NXP/Philips SJA1000 CAN Controller running at 16Mhz.

Sending and receiving CAN messages can be done in our standard ASCII format which has been adopted by many other companies.ġ meter shielded USB cable (variates depending on dealer).

This means it can be treated by software as a standard COM Port (virtual serial RS232 port) with the FTDI USB drivers which eliminates the need for any extra drivers (DLL) or optionally by installing a direct driver DLL (D2XX) together with our CANUSB DLL for faster communications and higher CAN bus loads. A versatile CAN to USB Interface Converter with an open APIĬANUSB is a very small dongle that plugs into any PC USB Port and gives an instant CAN connectivity.

Free download usb c pinout